This program provides the analysis of foundation beams resting on the elastic foundation (subsoil). The main features of GEO5 Beam program are: Winkler – Pasternak model of subsoil (parameters of subsoil C1, C2) Automatic calculation of constants...
Software for the computation of bearing capacity on loose or rocky soils, according Terzaghi, Meyerhof, Hansen, Vesic, Brinch-Hansen, Richards et. Al, Meyerhof and Hanna (1978) and computation of bearing capacity factors. Settlements: Elastic (Timosh...
This program calculates the bearing capacity of square, rectangular, continuous and circular footings in:-Granular soils – Phi soils-Cohesive soils – C soils-Mixed soils – C-phi soils-Ground water table at ground surface or any where below that depth...
GGU-SETTLE allows the calculation of foundation settlement using rectangular or triangular foundations, including mutual influence. The stress distribution at the base of the foundation can change in a linear manner in all directions. Capabilities: C...
Program AXILTR, AXIal Load-TRansfeR, consists of a main routine and two subroutines. The main routine feeds in the input data, calculates the effective overburden stress, and determines whether the load is axial down-directed, pullout, or if uplift/d...
Foundation type: • Strip footing • Spread footing • Mat foundation • Circular foundation • Retaining wall foundation • Foundation on slope and global stability analysis Foundation bearing capacity is calculated wi...
Easy to use and comprehensive spreadsheet for designing reinforced and unreinforced concrete strip footings. Allows to apply axial, bending moment and/or horizontal loads. Supported wall can be positioned centrally or eccentrically on the footing. Th...
“Dartis Foundation” calculates bearing capacity of shallow foundations considering both “shear failure” and “settlement”. Meyerhof, Vesic, Hansen and other well_known methods are employed for the determination of shear failure. Elastic, primary a...
The computer program SETOFF analyzes foundation settlement of both, shallow and deep foundations, using commonly-accepted procedures. The total settlement of a foundation is generally composed of two parts, elastic and consolidation settlement. Elast...
LimitState: GEO is the revolutionary geotechnical stability analysis software that can be used to rapidly determine the critical failure mechanism and margin of safety for any type of problem.LimitState: GEO is a single, general-purpose geotechnical...
SteinP 3DT is a usefull software for contacting settlements calculation taking into consideration the influence of nearby footing elements. All calculations are contacted according to the procedure described in DIN 4019 while the stresses calculation...
Analysis and design of retaining structures manufactured using concrete elements, stacked blocks and gabions. Capabilities System input using absolute heights Choice of analysis using either partial safety factors to DIN 1054:2005 or EC 7 or g...
Ce.Ca.P. is a complete package for the analysis and design of foundations; because of its completness, flexibility ad user-friendliness it is a fundamental instrument for any kind of geothecnical project. To calculate the bearing capacity of foundati...
SteinN Pro is a useful software for contacting preliminary settlements calculation below a rectangular footing. All calculations are contacted according to the procedure described in DIN 4019. SteinN Pro can perform a paramteric analysis based on a g...
The shallow foundation module is a suite of programs part of the Geotechnical Desktop applications. The module has been developed to help geotechnical engineers analyze and design shallow foundations. the program allows engineers to calculate the be...
